VCarve Desktop gcode for Shapeoko XL

rambo2_981
Posts: 10
Joined: Tue Aug 27, 2019 5:03 pm

Re: VCarve Desktop gcode for Shapeoko XL

Post by rambo2_981 » Wed Jan 06, 2021 1:08 pm

alexvarden wrote:
Wed Jan 06, 2021 9:11 am
It would be great if the VCarve format was published like CC's JSON.
I asked Vectric this a while ago and they said they consider the VCarve file format proprietary which, in this world of open software and formats, is unfortunate.

Post Reply