GrblGru = Free 3D-Simulation for ShapeOko2

GrblGru
Posts: 258
Joined: Sat Nov 01, 2014 5:44 pm

Re: GrblGru = Free 3D-Simulation for ShapeOko2

Post by GrblGru » Tue Apr 27, 2021 7:54 pm

Release notes V4.2

once again there is a new GrblGru version V4.2. This time most of the changes have been made for the lathe operation.
In the video I tried to describe the most important changes.

Have fun with GrblGru

My workflow: Only a 2D-editor and GrblGru, that's it
Free download from https://GrblGru.com
Youtube: https://www.youtube.com/channel/UC4_AHk ... 61ZW4qBHWA

GrblGru
Posts: 258
Joined: Sat Nov 01, 2014 5:44 pm

Re: GrblGru = Free 3D-Simulation for ShapeOko2

Post by GrblGru » Tue Aug 03, 2021 5:09 pm

It is such a shame what is happening to this great forum.


Release notes V4.2.20

Unfortunately I haven't had time lately to document all the changes and innovations that have been made.
The short video is the attempt to reduce the traffic jam a little. It deals with some improvements in the area "Tangential Blade".
The current program version is V4.2.20.

Have fun with GrblGru

My workflow: Only a 2D-editor and GrblGru, that's it
Free download from https://GrblGru.com
Youtube: https://www.youtube.com/channel/UC4_AHk ... 61ZW4qBHWA

GrblGru
Posts: 258
Joined: Sat Nov 01, 2014 5:44 pm

Re: GrblGru = Free 3D-Simulation for ShapeOko2

Post by GrblGru » Thu Nov 25, 2021 8:45 pm

Lately I just haven't had the time to document the program changes I've made.
Especially the Youtube videos often consume a lot of time. Even if you don't always see it that way :)
The problem is that it is very difficult to divide this work over several days, and thus always a large amount of time is needed at a stretch.

Therefore I would like to try in the future once whether it is better to make shorter videos, which deal then however only with one function, method etc.. Today I want to start with the duplicate function. A function that allows you to duplicate a calculated project.
The video is only about 4 minutes long.

Have fun with GrblGru

My workflow: Only a 2D-editor and GrblGru, that's it
Free download from https://GrblGru.com
Youtube: https://www.youtube.com/channel/UC4_AHk ... 61ZW4qBHWA

Post Reply