QCAD 3.2 now with CAM addon

Post Reply
Posts: 174
Joined: Thu Apr 12, 2012 2:49 pm

QCAD 3.2 now with CAM addon

Post by alpha » Fri Aug 16, 2013 9:20 pm

I did not had time to play with the new version of QCAD 3.2 (free and open source) yet, but I did notice it includes a CAM add on (not free, but 15 min trial mode with restart possible).

Did anybody try the CAM module yet?

On the CAD it self it looks like some new tools got added and some other tools got some updates. I only looked very briefly over it but so far I like what I see.

Posts: 61
Joined: Thu Oct 31, 2013 6:56 pm
Location: Florida, USA

Re: QCAD 3.2 now with CAM addon

Post by cmcgrath5035 » Thu Oct 31, 2013 7:20 pm

I recently upgraded my QCAD to QCADCAM ver 3.4.2
Early experiments with GCode back end look good.
QCAD now supports per Layer Z depth, a workable 2.5D solution.

QCAD folks also working on a Machine Simulator
ShapeOko (V1) SN 1462
Dual 820mm Y, Double X, ACMEZ. V2 Motor Plates
TinyG V7 Controller; DUE and tinyGV9 test bed for tinyG2

Post Reply