Page 1 of 1

Cetina CAD freeware front panel designer

Posted: Tue Dec 16, 2014 7:36 pm
by WillAdams
This was mentioned on the Carbide3D forums:

http://frontplatten-expert.de/de/downloads

Gets a positive mention most places and appears on some Windows download sites, so likely Windows-only.

Re: Cetina CAD freeware front panel designer

Posted: Thu Dec 18, 2014 3:38 am
by Damin69
Link does not work at all...

Re: Cetina CAD freeware front panel designer

Posted: Thu Dec 18, 2014 3:45 am
by WillAdams
Site seems to be down at the moment --- it did work when I first posted it --- if you check at http://community.carbide3d.com you should be able to find a link on CNET.com or some similar download hosting site if memory serves.

Re: Cetina CAD freeware front panel designer

Posted: Thu Dec 18, 2014 4:15 am
by Damin69
Ok seems to be free BUT... it will only save in the program format. In order to save/export to a dxf/dwg/gcode you must order and pay about $88. but looks like a fairly simple program and does have a neat part library.

Re: Cetina CAD freeware front panel designer

Posted: Thu Dec 18, 2014 4:34 am
by WillAdams
Oh. Darn.

Can one print in vector format?

Moving it to the commercial page.