Page 2 of 2

Re: Goko - Free CNC Control Software

Posted: Sat May 30, 2015 4:30 pm
by lledee
All,

Looking at the log files I found this little snippet below that shows I was missing JVM-64 bit. Although the JVM-32 bit was installed it still wasn't working.

I just went download the latest JVM-64bit from JAVA, https://java.com/en/download/manual.jsp. Just get the file named "Windows Offline (64-bit)" and install that and you will be good to go.

Here is the snippet from the log file that caught my attention, scroll down to the highlighted section ( I don't know much about code at all!):
Screenshot.png
Screenshot
Screenshot.png (108.07 KiB) Viewed 1701 times

Re: Goko - Free CNC Control Software

Posted: Sat May 30, 2015 5:09 pm
by PsyKo
@Lledee Thanks for the update :)

Re: Goko - Free CNC Control Software

Posted: Fri May 13, 2016 5:49 pm
by PsyKo
Hello,

The new version of Goko is available. Version 0.3.0.

It includes new features :
- Support for Grbl v0.9
- New GCode parsing functionalities,
- Added GCode modifiers support (Translate, rotate, scale, segmentize...),
- Added auto-leveler,
- Added wrapper to convert GCode to 4 axis,
- Added support for Shuttle XPress device,
- Added save/load project features,
- Added execution queue for multiple files,
- Improved jog functionnality,

The new version can be download on http://goko.fr
Documentation : http://docs.goko.fr
Community : http://discuss.goko.fr

Let me know if there is any question or issue.

Re: Goko - Free CNC Control Software - New version : May 05,

Posted: Wed Oct 05, 2016 12:15 pm
by PsyKo
Hi,

Version 0.3.1 is available.

Changelog

Added
- GCode text editor with syntax highlighting and error detection,
- Added keybinding for Shuttle Xpress for Homing Sequence, and Reset Zero,
- Finer control over grid opacity,
- Customizable background color in 3D preview,
- Customizable camera controls
- More documentation http://docs.goko.fr/
- Added array modifier

Fixed
- Fixed Translate modifier to apply translation to motion only if they are affected on one axis at least,
- Fixed execution monitor sometimes missing the few last commands of a file.
- Fixed Restore Defaults for Quantity fields in preferences. It no longer writes unit in quantity field.


Download
If already in use, Goko will update itself to the latest version.

For fresh install, the new version can be downloaded on http://goko.fr
Documentation : http://docs.goko.fr
Community : http://discuss.goko.fr

Let me know if there is any question or issue.

Re: Goko - Free CNC Control Software - New version : Oct 04,

Posted: Fri Oct 28, 2016 1:40 pm
by johndavis726
I'm very interested in command line support - something I haven't been able to find with universal g code sender. Have you or will you include such support?

Re: Goko - Free CNC Control Software - New version : Oct 04,

Posted: Fri Oct 28, 2016 4:17 pm
by WillAdams
There are two tools which I'm aware of which support CLI, listed on the wiki:

http://www.shapeoko.com/wiki/index.php/ ... ontrol#CLI

It would be nice for the GUI tools to support this as well.

Re: Goko - Free CNC Control Software - New version: May 17,

Posted: Sun May 28, 2017 5:15 pm
by PsyKo
Hello,

Just a quick message to inform you that Goko 0.3.4 was released, and includes a full set of features for Grbl 1.1
It allows to control your Grbl based CNC and stream GCode to it.

Changelog is available here : http://docs.goko.fr/master/changelog.html#version-0-3-4

Latest binaries can be downloaded at http://goko.fr/

Have fun, and feel free to post feedbacks :slight_smile:

Psyko

Re: Goko - Free CNC Control Software - New version : Oct 04,

Posted: Sun Jun 24, 2018 1:45 am
by retnuh22
Quick question. I have tried for months to get software to interact with my tinyg controller. Yours is the first that seems pretty straight forward. I have loaded a gcode into the software and I don't see how ro execute the command to start cutting. Am I missing something?

Thanks!!

Garret