Upvotes if you use Fusion 360

Post Reply
atrueresistance
Posts: 151
Joined: Thu Feb 07, 2013 6:20 pm

Upvotes if you use Fusion 360

Post by atrueresistance » Fri Apr 24, 2015 3:37 pm

Fusion 360 IdeaStation: Request a Feature or Enhancement
With enough upvotes, they may implement.

Shapeoko Post Processor
http://forums.autodesk.com/t5/fusion-36 ... -p/5607103
Shapeoko 1 #unknown
Shapeoko 3 #572
Checkout my Etsy Store

pepik
Posts: 32
Joined: Sat Nov 22, 2014 11:35 pm

Re: Upvotes if you use Fusion 360

Post by pepik » Sat Apr 25, 2015 2:05 pm

++
Shapeoko 2 #7266
DW660 spindle
Upgraded wasteboard
Drag Chains

scott216
Posts: 226
Joined: Thu Oct 10, 2013 12:35 pm
Location: New Jersey

Fusion 360 Post Processor

Post by scott216 » Sat May 02, 2015 2:03 am

I took the grbl post processor that comes with Fusion and modified it for Shapeoko. I got rid of the G28 command and replaced it with a z-axis move to the clearance height. I also moved the code that sets the work coordinates earlier in the program so the work coordinates are set before any move commands are sent. See attached.
Attachments
shapeoko post processor.zip
Shapeoko Post Processor
(4.88 KiB) Downloaded 295 times
Shapeoko 2 with DW660
grbl v0.9g
PCB Toolchain: Cadsoft Eagle > pcb-gcode > Chilipeppr or GRBL Panel
Other Toolchain: Fusion 360 > Chilipeppr or GRBL Panel
My Build Log
Location: New Jersey

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: Upvotes if you use Fusion 360

Post by chomdh » Mon Nov 30, 2015 4:13 am

So this will raise the Z height before traversing to the first feature? If so, thank you, and I need to try this ASAP. Anything I generate with Fusion will rapid to the first feature without lifting the Z.
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

Post Reply