MADCAM Post processor

Post Reply
Cheizen
Posts: 4
Joined: Tue Dec 01, 2015 10:18 pm

MADCAM Post processor

Post by Cheizen » Tue Dec 08, 2015 3:09 am

Hey Guys here is the post For Mad Cam , i have only tested it on the Shapeoko 3, but it should work with any machine running Grbl.

For those who don´t know, Mad cam is a CAM plugin for Rhino. Its Great For milling complex 3D shapes. :)
Attachments
Shapeoko 3.txt
(865 Bytes) Downloaded 75 times

Post Reply