Fusion 360 2D Pocket Issues

Post Reply
Fly Capt
Posts: 13
Joined: Wed Nov 29, 2017 1:17 pm

Fusion 360 2D Pocket Issues

Post by Fly Capt » Sun Feb 11, 2018 12:30 am

Using Fusion 360 to generate code for my 3XL.
Issue is running a 2D Pocket with 3 passes. The first and second pass are perfect. Does clearing and then outlines. But the third pass forgets to clear and jumps right to the outlining and never comes back to clear???

Post Reply