T-track spacing

Talk about all things CNC
Post Reply
Posts: 42
Joined: Wed Apr 29, 2015 2:17 am

T-track spacing

Post by Ric » Wed Oct 23, 2019 1:10 am

I'm upgrading my Shapeoko 2 to 1000mmx1000mm. I decided to use T-track, and wonder what is the best spacing between them. On my old wasteboard, I have T-nuts spaced about 3" apart (I think), but I'm wondering if with T-track I could go 4" or even 6"?

Also, I'm trying to decide how to construct the wasteboard, and I have 2 ideas. The first would be to put down .5" MDF as the base, glue & screw the T-track on top of it, with .5" MDF in between the T-track (the T-track is .5" deep). Another option is to use my router to make .5" grooves in some .75" MDF, and place the T-track in it. If I go this second method, under the T-track the wasteboard will only be .25" thick, and I worry that might be too thin. Any thoughts about which of these options might be best?


Posts: 8628
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15

Re: T-track spacing

Post by WillAdams » Wed Oct 23, 2019 10:45 am

Spacing on threaded holes or T-track should be slightly less than the reach of one clamp --- that way you can position stock anywhere and clamp along any edge.

The alternative is to use a ratio such as Phi, with the expectation that one can find some placement which will work.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Posts: 1351
Joined: Tue Jan 29, 2013 4:51 pm
Location: Minneapolis, MN

Re: T-track spacing

Post by twforeman » Thu Oct 31, 2019 7:24 pm

I spaced my T-Track at 3" spacing. Seems to work pretty well.
Ender 3 3D Printer
ShapeOko v3 serial #0004 - upgrade thread
All of my ShapeOko related blog posts

Post Reply