3/4 dia 2 flute straight bit

Talk about all things CNC
Post Reply
Jeff
Posts: 165
Joined: Thu Jun 29, 2017 12:33 pm

3/4 dia 2 flute straight bit

Post by Jeff » Mon Mar 01, 2021 2:57 pm

I am using a 3/4 " dia 2 flute bit to do a pocket will I be able to use the probe to set my XYZ and will htat big of bit work on the bit setter as well
Thanks Jeff

Jeff
Posts: 165
Joined: Thu Jun 29, 2017 12:33 pm

Re: 3/4 dia 2 flute straight bit

Post by Jeff » Mon Mar 08, 2021 1:25 pm

I guess I will answer my own question Yes you can

WillAdams
Posts: 8629
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: 3/4 dia 2 flute straight bit

Post by WillAdams » Mon Mar 08, 2021 2:15 pm

Apologies.

This forum isn't as active as the others:

https://community.carbide3d.com/

To expand on your answer --- any endmill which is either narrow enough to fit on the button (a bit less than 11mm diameter) or which has structure at the center even with the cutting edge will work.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Post Reply