what shop Vac you would recommend for shapeoko

Talk about all things CNC
WillAdams
Posts: 8629
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: what shop Vac you would recommend for shapeoko

Post by WillAdams » Wed Sep 04, 2013 10:38 am

I described what I want, not what I have.

Here's one inspiration: http://www.shapeoko.com/forum/viewtopic ... 22&p=10510

More forum links:

http://www.shapeoko.com/forum/viewtopic.php?f=11&t=141
http://www.shapeoko.com/forum/viewtopic.php?f=11&t=475

As I noted, I'm using an old vacuum at a low setting.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

stephenjbell
Posts: 25
Joined: Mon Nov 04, 2013 5:16 am

Re: what shop Vac you would recommend for shapeoko

Post by stephenjbell » Mon Feb 03, 2014 4:55 am

I bought the $40 version of the Oneida Dust Deputy. It looks good, but I haven't used it yet. I just cut holes in my bucket lid to mount it, and thought I'd pass my file along.

I'm attaching an SVG to cut a bucket lid with the holes at the right placement/size to attach the Dust Deputy. It's generated from makercam.com and has all the feed speeds and everything entered for a DW660 1/8" bit. Change the file extension back to SVG, then open it in makercam.com (or use it in other software as a starting point).

I'm not responsible for anything bad that happens as a result of using this file.
Attachments
buckethole-makercamsvg.txt
Cut bucket lid for Dust Deputy - makercam.com SVG
(2.07 KiB) Downloaded 165 times

Post Reply