Photos of parts made with Shapeoko

Talk about all things CNC
Post Reply
ZachKaplan
Posts: 89
Joined: Fri Apr 13, 2012 1:38 pm

Photos of parts made with Shapeoko

Post by ZachKaplan » Sun May 27, 2012 7:58 pm

I would like to do a blog post about the Shapeoko operators and I'm looking for some good photos of parts made with the Shapeoko. I took a look at some in the gallery but was hoping in addition to those there might be some new ones of parts folks have made since posting.

Does anyone have anything they are proud of that they would like to share?

Thanks,
Zach

AtomSoft
Posts: 589
Joined: Mon Apr 09, 2012 9:15 pm
Location: Brooklyn NY
Contact:

Re: Photos of parts made with Shapeoko

Post by AtomSoft » Mon May 28, 2012 1:28 am

I wish i had some. As soon as i get the shapeoko ill take TONS of pictures and send them to you or post links and give you permission to use them.
Blog / Store
Live to Love, Not to Hate.
You're not a failure because you don't make it, you're a success because you tried.
Do you like the help i give? Think i deserve a tip? DONATE

Improbable Construct
Posts: 997
Joined: Tue Apr 10, 2012 3:21 am
Location: Fairhope, AL
Contact:

Re: Photos of parts made with Shapeoko

Post by Improbable Construct » Mon May 28, 2012 2:54 am

I will try and get some to you this week.
Shapeoko #Classified some of the bolts may be original parts.
Shapeoko 1 # ???? Stainless plates, still in the box.
Shapeoko 2 # 3926 not stock
Shapeoko 3 # 0003
Store:
http://ImprobableConstruct.com
Twitter:
https://twitter.com/ImprblConstruct

Improbable Construct
Posts: 997
Joined: Tue Apr 10, 2012 3:21 am
Location: Fairhope, AL
Contact:

Re: Photos of parts made with Shapeoko

Post by Improbable Construct » Sat Jun 02, 2012 2:10 am

Here are a couple of fathers day presents I have made/am working on with my ShapeOko:
ShapeOko 007 (Large).jpg
ShapeOko 007 (Large).jpg (96.42 KiB) Viewed 2801 times
ShapeOko 008 (Large).jpg
ShapeOko 008 (Large).jpg (84.63 KiB) Viewed 2801 times
ShapeOko 013 (Large).jpg
ShapeOko 013 (Large).jpg (67.21 KiB) Viewed 2801 times
-Brandon
Shapeoko #Classified some of the bolts may be original parts.
Shapeoko 1 # ???? Stainless plates, still in the box.
Shapeoko 2 # 3926 not stock
Shapeoko 3 # 0003
Store:
http://ImprobableConstruct.com
Twitter:
https://twitter.com/ImprblConstruct

nio
Posts: 115
Joined: Mon Apr 09, 2012 7:31 pm

Re: Photos of parts made with Shapeoko

Post by nio » Sat Jun 02, 2012 9:36 pm

Awesome mate!!!

Max Metz
Posts: 240
Joined: Sun May 20, 2012 11:55 am

Re: Photos of parts made with Shapeoko

Post by Max Metz » Sun Jun 03, 2012 12:09 am

Excellent Brandon! :D

AtomSoft
Posts: 589
Joined: Mon Apr 09, 2012 9:15 pm
Location: Brooklyn NY
Contact:

Re: Photos of parts made with Shapeoko

Post by AtomSoft » Sun Jun 03, 2012 12:13 am

Awesome! I just noticed i neglected one thing when learning this CNC stuff... learning to paint! :) I guess i can use my PC to also test colors on it... like a 2D preview :)
Blog / Store
Live to Love, Not to Hate.
You're not a failure because you don't make it, you're a success because you tried.
Do you like the help i give? Think i deserve a tip? DONATE

Colecago
Posts: 136
Joined: Fri Jun 08, 2012 5:31 pm

Re: Photos of parts made with Shapeoko

Post by Colecago » Fri Jun 08, 2012 5:57 pm

AtomSoft wrote:Awesome! I just noticed i neglected one thing when learning this CNC stuff... learning to paint! :) I guess i can use my PC to also test colors on it... like a 2D preview :)
Don't worry about painting, replace your dremel with a paintbrush and let the Oko do the work :-D

AtomSoft
Posts: 589
Joined: Mon Apr 09, 2012 9:15 pm
Location: Brooklyn NY
Contact:

Re: Photos of parts made with Shapeoko

Post by AtomSoft » Fri Jun 08, 2012 5:59 pm

hah :D thats a nice Idea! i might do that... might :)
Blog / Store
Live to Love, Not to Hate.
You're not a failure because you don't make it, you're a success because you tried.
Do you like the help i give? Think i deserve a tip? DONATE

ZachKaplan
Posts: 89
Joined: Fri Apr 13, 2012 1:38 pm

Re: Photos of parts made with Shapeoko

Post by ZachKaplan » Sun Jun 10, 2012 10:36 pm

That's awesome!

Would you be willing to upload it as an example in the "Projects & Applications" section here: (scroll down about half way)
https://www.inventables.com/technologie ... s-shapeoko

I think it would be inspiring for someone to see that was made with a Shapeoko. WOW.

Post Reply