DeWalt DW611 CAD Model

Talk about all things CNC
Post Reply
Luxx
Posts: 15
Joined: Mon Dec 30, 2013 11:49 pm

DeWalt DW611 CAD Model

Post by Luxx » Sun Nov 23, 2014 10:02 pm

I was wondering if anyone had a CAD model of the DeWalt DW611, or dimensions so that I may make a model.
Thanks
Shapeoko2 #3529 - DW660, Nema23 X+Y, Reinforced wasteboard.

samc99us
Posts: 269
Joined: Mon Nov 11, 2013 5:20 pm

Re: DeWalt DW611 CAD Model

Post by samc99us » Mon Nov 24, 2014 7:46 pm

Solidworks and .STEP files attached.
Attachments
Dewalt DNP611.zip
.SLDPRT and .STEP files of the Dewalt DNP611 Router
(142.9 KiB) Downloaded 194 times
Modified Shapeoko 2: 1500mm fully supported y-axis, 1000 mm 4060 x-axis, ACME Belt Drive Z-axis, Dewalt DNP611, full aluminum t-slot table, 4x NEMA23 180 oz/in stepper motors driven by a G540

Luxx
Posts: 15
Joined: Mon Dec 30, 2013 11:49 pm

Re: DeWalt DW611 CAD Model

Post by Luxx » Tue Nov 25, 2014 3:56 am

Thanks!
Shapeoko2 #3529 - DW660, Nema23 X+Y, Reinforced wasteboard.

phinsil6
Posts: 26
Joined: Tue Apr 22, 2014 7:28 pm

Re: DeWalt DW611 CAD Model

Post by phinsil6 » Sun Nov 30, 2014 6:28 pm

Thanks for the model!

I loaded the model into fusion 360 and I noticed the big yellow thing jutting out of the side. What is that supposed to represent because mine doesn't have that

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: DeWalt DW611 CAD Model

Post by chomdh » Tue Jan 06, 2015 2:58 am

@ Phinsil - that big yellow thing is where the cable enters the plastic housing.

@ Sam, thanks for sharing the model.
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

Post Reply