Very simple and cheap spindle mount

Talk about all things CNC
Post Reply
gerogejg1
Posts: 21
Joined: Mon Sep 01, 2014 10:35 pm

Very simple and cheap spindle mount

Post by gerogejg1 » Fri Mar 13, 2015 2:49 pm

I needed a mount for my dewalt dnp 611 and didn't want to spend the time or money on one so I decided to make my own .all you need is two pieces of 1/2" aluminum ,four 1 1/4" screws and two large hose clamps . all I had to do is cut out the two aluminum piece from a plate I had then drill a hole through the hose clamps and aluminum .Image



Image


Image


Image

samc99us
Posts: 269
Joined: Mon Nov 11, 2013 5:20 pm

Re: Very simple and cheap spindle mount

Post by samc99us » Tue Mar 17, 2015 6:14 pm

Great idea! How tram is your spindle?
Modified Shapeoko 2: 1500mm fully supported y-axis, 1000 mm 4060 x-axis, ACME Belt Drive Z-axis, Dewalt DNP611, full aluminum t-slot table, 4x NEMA23 180 oz/in stepper motors driven by a G540

Post Reply