Vac or planer ?

Talk about all things CNC
Defy
Posts: 209
Joined: Sat Jan 03, 2015 5:53 pm
Location: Omaha
Contact:

Re: Vac or planer ?

Post by Defy » Thu Aug 06, 2015 3:09 am

WillAdams wrote:The Disston saws may be the real treasure.
Probably not

Image

Image

Rancher and a challenger? It least i'll learn how to sharpen on them.


Lots of fun stuff in the boxes but nothing crazy yet there is a cool set of screwdriver push drill things

Gadgetman!
Posts: 1061
Joined: Sun Aug 25, 2013 12:44 pm
Location: Norway
Contact:

Re: Vac or planer ?

Post by Gadgetman! » Thu Aug 06, 2015 6:50 am

You'll also need a tool to 'set the angle' of the teeth on those saws.
(you bend the teeth slightly to one side or the other so that the cut they make is slightly wider than the blade. That way it doesn't stick too easily.)

Maybe a vintage Disston ?
http://www.ebay.com/itm/VINTAGE-H-DISST ... 1c520fea3b

+1 Cudos for taking your girl fishing!

I don't have any little girls to teach, so I had to go fish all by myself...
http://anthony-lion.livejournal.com/358811.html

Yeah, 6 mackerels on the line at he same time. ;-)
Weird guy...
Shapeoko 2014F: 1000mm X/Y, 300W Quiet Cut spindle, Arduino Uno/G-shield and GRBL 0.9i
15x30 drag chains, custom spindle mount, 9mm belts, 8mm endplates, 6mm motor plates.

Defy
Posts: 209
Joined: Sat Jan 03, 2015 5:53 pm
Location: Omaha
Contact:

Re: Vac or planer ?

Post by Defy » Sat Aug 08, 2015 2:17 am

Got my first LN! I can see this is going to be an expensive hobby....
Image

Defy
Posts: 209
Joined: Sat Jan 03, 2015 5:53 pm
Location: Omaha
Contact:

Re: Vac or planer ?

Post by Defy » Sun Aug 23, 2015 7:22 pm

Saw mill scraps....

Image

I think i can justify the planer now! Can anyone spot the guitar blanks ;)

Woodworker
Posts: 639
Joined: Tue Mar 11, 2014 1:37 am
Location: 5 miles north of Benson, NC

Re: Vac or planer ?

Post by Woodworker » Mon Aug 24, 2015 12:10 pm

That looks like a good haul! What wood species is in the mix?
BRuce - SO2 #4798 - IC's Z axis upgrade, customized Z rail and Z motor mount, spindle Dewalt 611

Defy
Posts: 209
Joined: Sat Jan 03, 2015 5:53 pm
Location: Omaha
Contact:

Re: Vac or planer ?

Post by Defy » Mon Aug 24, 2015 4:48 pm

Mostly white oak, walnut, cherry and some other odds and ends.

Image

After i stacked what i wanted out of that load should be plenty to play with just need to start designing some stuff now.

I am going to start a new thread where i post a pic of a piece of wood and folks shoot ideas of what i should make out of it.

Post Reply