Thanks for all your combined help over the last few days, my S3 XL is running well.
Thought I'd share a picture of my first real cut, besides test artifacts. It's my Company Logo.
- Fowler Logo
- fowler.jpg (267.29 KiB) Viewed 574 times
Cheers,
Fred
1st Cut - New XL
1st Cut - New XL
Hey all,
Thanks for all your combined help over the last few days, my S3 XL is running well.
Thought I'd share a picture of my first real cut, besides test artifacts. It's my Company Logo.
About 75x25mm, done with V-Carve, 60 deg .25" v-bit, 15mm/s with 0.5mm passes. Needs a little tweaking but I'm pretty happy! Now onto bigger and better things!
Cheers,
Fred
Thanks for all your combined help over the last few days, my S3 XL is running well.
Thought I'd share a picture of my first real cut, besides test artifacts. It's my Company Logo.
About 75x25mm, done with V-Carve, 60 deg .25" v-bit, 15mm/s with 0.5mm passes. Needs a little tweaking but I'm pretty happy! Now onto bigger and better things!
Cheers,
Fred
Shapeoko 3 XL - Dewalt 611 Router
PreciseBits Collet Set
V-Carve Pro 8.5, Meshcam Pro, Fusion 360, QCAD
UGS & Hot ChiliPeppr!
PreciseBits Collet Set
V-Carve Pro 8.5, Meshcam Pro, Fusion 360, QCAD
UGS & Hot ChiliPeppr!
Re: 1st Cut - New XL
Grats and enjoy the fun to come.