1st Cut - New XL

Talk about all things CNC
Post Reply
Posts: 18
Joined: Wed Jun 15, 2016 5:24 pm
Location: Massachusetts

1st Cut - New XL

Post by fredfow3 » Thu Aug 04, 2016 5:46 pm

Hey all,

Thanks for all your combined help over the last few days, my S3 XL is running well.

Thought I'd share a picture of my first real cut, besides test artifacts. It's my Company Logo.
Fowler Logo
fowler.jpg (267.29 KiB) Viewed 575 times
About 75x25mm, done with V-Carve, 60 deg .25" v-bit, 15mm/s with 0.5mm passes. Needs a little tweaking but I'm pretty happy! Now onto bigger and better things!


Shapeoko 3 XL - Dewalt 611 Router
PreciseBits Collet Set
V-Carve Pro 8.5, Meshcam Pro, Fusion 360, QCAD
UGS & Hot ChiliPeppr!

Posts: 25
Joined: Fri Apr 01, 2016 12:23 am

Re: 1st Cut - New XL

Post by Bonch » Thu Aug 04, 2016 6:28 pm

Grats and enjoy the fun to come.

Post Reply