Can you tell me how the spindle rpm is controlled .
Jeff
Live in the Columbus Ohio area
Re: Live in the Columbus Ohio area
As you can see in the kit
It comes with a VFD controller and you have to program it to work with the spindle.
I’ve have read several posts regarding programming the VFD where people have said it was too complicated so I was worried but once I had a chance with it I found it really wasn’t that hard to get it programmed
It comes with a VFD controller and you have to program it to work with the spindle.
I’ve have read several posts regarding programming the VFD where people have said it was too complicated so I was worried but once I had a chance with it I found it really wasn’t that hard to get it programmed
-
neilferreri
- Posts: 5
- Joined: Fri Dec 11, 2015 3:58 am
Re: Live in the Columbus Ohio area
Hey guys,
I'm in Dublin also. I've had a SO3 for a few years and upgraded to the XL a couple years ago.
I'm pretty active in the C3D forum, but, to be honest, I have barely looked at this one.
Neil
I'm in Dublin also. I've had a SO3 for a few years and upgraded to the XL a couple years ago.
I'm pretty active in the C3D forum, but, to be honest, I have barely looked at this one.
Neil