Video Upload

Blue
Posts: 3
Joined: Wed Apr 18, 2012 9:18 am

Video Upload

Post by Blue » Wed Apr 18, 2012 9:28 am

Question, How well is the Shapeoko at 3D Printing? rigidity etc (with acrylic, aluminium, mild steal etc )

video upload... would be nice.

edwardrford
Posts: 1250
Joined: Mon Apr 09, 2012 5:40 pm
Location: Dixon, IL
Contact:

Re: Video Upload

Post by edwardrford » Wed Apr 18, 2012 1:11 pm

Hi Blue,

Right now the 3D printing capability of Shapeoko is alpha stage.

We know it will work, but the specifics have yet to be ironed out. There is an example of someone on youtube running their machine from 3D printer electronics (RAMPS v1.4 perhaps?). But otherwise, there is no video. Yet.

-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock

Blue
Posts: 3
Joined: Wed Apr 18, 2012 9:18 am

Re: Video Upload

Post by Blue » Sat Apr 21, 2012 11:44 am

dear lord, spammed... kill me now... Cheers for the reply.

But slightly confused, looking back at the images on the Shapeoko and inventables site, it looks as tho. Shapeoko has 2 dedicated stepper motors for X and Y and the dremel as a stationary Z? or is it 3 dedicated stepper motors for X,Y and Z, and the Dremel used to control the feed rate for cutting?

In terms to getting it to an open beta? what do you believe the time frame would be [to cut on all 3 axis]? also is it hardware or software that needs to be further developed? i imagine it being software issues, which need to be ironed out? [don't get me wrong, software development is nothing to scoff at.]

also i youtubed - RAMPS v1.4: it lead me to Rep-Rap clips...

Cheers,
Blue.

Blue
Posts: 3
Joined: Wed Apr 18, 2012 9:18 am

Re: Video Upload

Post by Blue » Sat Apr 21, 2012 12:25 pm

discard the stepper motor confusion... saw on the parts list, that shapeoko is a 3 stepper motor setup.

Cooper8
Posts: 1
Joined: Wed Apr 25, 2012 7:31 am

Re: Video Upload

Post by Cooper8 » Wed Apr 25, 2012 7:32 am

Thanks for the information.

johnmcrin
Posts: 6
Joined: Tue Apr 24, 2012 7:19 pm

Re: Video Upload

Post by johnmcrin » Wed Apr 25, 2012 3:23 pm

Printrbot and Shapeoko. For the past few years I've been pretty obsessed with 3D printing.

johnmcrin
Posts: 6
Joined: Tue Apr 24, 2012 7:19 pm

Re: Video Upload

Post by johnmcrin » Thu Jun 07, 2012 7:52 pm

I have a reoccurring interest in both 3d printing and CNC mills

jackrats
Posts: 5
Joined: Tue Jun 19, 2012 11:19 pm

Re: Video Upload

Post by jackrats » Wed Jun 20, 2012 1:44 am

Would I be ignorant in thinking that the spindle could simply be replaced with an extruder in order to get 3D printing on a Shapeoko? Obviously, adding a hotbed and necessary electronics to drive the extruder, etc would go along with that, but as far as the mechanics go, would that be a correct assessment?

jrsteensen
Posts: 118
Joined: Mon Jun 11, 2012 9:29 pm

Re: Video Upload

Post by jrsteensen » Wed Jun 20, 2012 2:12 am

Actually, I was just thinking about this. It would be somewhat limited in Z axis prints, but it shouldn't take much to be able to wire one up to RAMPS and slap a extruder on and go.

JamesJohn
Posts: 1
Joined: Tue Nov 13, 2012 8:03 pm

Re: Video Upload

Post by JamesJohn » Tue Nov 13, 2012 8:14 pm

Hi guys, hope you'll are great!

could someone make a list of parts needed to convert the shapeoko cnc to a 3d printer?

at any point, is this viable to be in the S.O. wiki?

I was thinking that it would be great if the final user had the chance to print or cut on the shapeoko with a few changes in the machine!

Post Reply