Single line letters

Post Reply
Posts: 46
Joined: Tue Nov 05, 2013 10:55 am

Single line letters

Post by kjetilhansen » Sat May 03, 2014 9:37 pm


How do you make single line letters? I am using AutCad and CamBam, but in autocad when I make letters they are one line, but in CamBam it's just the outlines..

Please check the example I've attached to see what I mean :)
concept_029.jpg (276.19 KiB) Viewed 1047 times
If you see in this picture there is single line letters that you can just color, but in CamBam my letter are like this:
eksempel.jpg (101.67 KiB) Viewed 1047 times

When I choose the engrave tool it makes an outline of all the letters, I want it to only make a line in the middle of the letter...


Posts: 8583
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15

Re: Single line letters

Post by WillAdams » Sat May 03, 2014 11:54 pm


- CAM the letters w/ a bit setting which only allows one path
- inset the letters by just less than half the diameter and delete redudant paths
- redraw
- ... Gcodetools
- set type using ... rshey_Text
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
Nomad 883 Pro #596 (bamboo)

Posts: 257
Joined: Fri Apr 13, 2012 3:34 am

Re: Single line letters

Post by DanMc » Sun May 04, 2014 1:04 pm

I've been using this set I assume they would work in other programs too as they are TrueType.

Posts: 587
Joined: Wed Jan 08, 2014 11:33 am
Location: Birmingham, UK

Re: Single line letters

Post by RobCee » Sun May 04, 2014 4:31 pm

CamBam has some addon 'StickFonts' if you search the CamBam forums.
They aren't all that pretty, but they work.
Alternatively, you can use the CamBam plugin for V-Engraving and use most of the TrueType fonts, as it will use a V-Shaped bit to cut the middles of the shapes out. It works well for me.
ShapeOko2 #3400 - Chinese 800W AC Spindle - Stiffened X-Axis - TR10 Z-Axis - Inverted Z Motor - Hall Effect Limits - Drag Chains & Custom Brackets

Post Reply