Thought this was quite ingenious: http://www.leevalley.com/US/wood/page.a ... 26&p=71906
and perhaps something which could be worked up easily for 3D printing?
3D printable tool storage system?
-
WillAdams
- Posts: 8616
- Joined: Mon Apr 09, 2012 6:11 pm
- Location: Pennsylvania --- south of the Turnpike, East of US-15
- Contact:
3D printable tool storage system?
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
-
ThatOtherGuy435
- Posts: 108
- Joined: Sat Feb 16, 2013 2:08 pm
Re: 3D printable tool storage system?
Here's a higher resolution image showing the mechanism a little clearer: http://www.conquer.tw/upload_files/Free ... /DM--3.jpg
Given the size requirements, I'm not sure how well the grate itself would be suited to 3D printing, and the raw stock for machining it out would be significantly higher than one of the grids.
The fixtures, though... I'm thinking I might snag a grid and a few fixtures and give it a shot.
Given the size requirements, I'm not sure how well the grate itself would be suited to 3D printing, and the raw stock for machining it out would be significantly higher than one of the grids.
The fixtures, though... I'm thinking I might snag a grid and a few fixtures and give it a shot.
ShapeOko1 #??? - 1000mm Dual-drive Y, Double X, S2 gantry motor plates, ACME Z-Axis.