PreciseBits Collets

Discussion about Tooling and Fixtures. End Mills, Router Bits, Hold Downs, Fixtures, Etc.
alhaddar
Posts: 22
Joined: Mon Nov 18, 2013 8:17 pm

PreciseBits Collets

Post by alhaddar » Mon Sep 28, 2015 6:29 pm

Hello
I have Bosch GKF 600 and I want her router extension Wade help you get it mounted on PreciseBits Collets

http://www.precisebits.com/products/equ ... !!KIT!!!PG!!!


thanks

twforeman
Posts: 1351
Joined: Tue Jan 29, 2013 4:51 pm
Location: Minneapolis, MN
Contact:

Re: PreciseBits Collets

Post by twforeman » Mon Sep 28, 2015 6:32 pm

Is there a question here?

If you are asking if the PreciseBits collets are available for a Bosch GFK 600 router you might be better off sending them an email directly, or calling them.

http://www.precisebits.com/contact_info.htm
Ender 3 3D Printer
ShapeOko v3 serial #0004 - upgrade thread
All of my ShapeOko related blog posts

alhaddar
Posts: 22
Joined: Mon Nov 18, 2013 8:17 pm

Re: PreciseBits Collets

Post by alhaddar » Mon Sep 28, 2015 6:50 pm

Emile has sent in this regard, but I did not get back from them with regret

AnonymousPerson
Posts: 758
Joined: Sun Apr 26, 2015 1:16 pm
Location: 3753 Cruithne

Re: PreciseBits Collets

Post by AnonymousPerson » Mon Sep 28, 2015 7:03 pm

twforeman wrote:Is there a question here?
At a guess, alhaddar might not be an english speaker, and might be using Google Translate (or similar).

I sometimes use the same approach when emailing non-english mailing lists. (not often, but sometimes needed for specific things ;>)
Shapeoko 3 #516

alhaddar
Posts: 22
Joined: Mon Nov 18, 2013 8:17 pm

Re: PreciseBits Collets

Post by alhaddar » Mon Sep 28, 2015 7:08 pm

I actually use the site through Google translator

WillAdams
Posts: 8606
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: PreciseBits Collets

Post by WillAdams » Mon Sep 28, 2015 7:09 pm

The Precise Bits folks should respond to the e-mail.

They do have an account here (TDA if memory serves), but e-mail or a contact form on their site is probably better.

Please let us know if you have any specific questions which aren't addressed by their products and its documentation and their customer service. A number of people use their collets w/ the Dewalt DWP611 and are quite pleased w/ them.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

TDA
Posts: 31
Joined: Wed Dec 18, 2013 11:14 pm

Re: PreciseBits Collets

Post by TDA » Mon Sep 28, 2015 9:45 pm

Unfortunately we no longer support the Bosch GKF 600. It's based on the Colt and uses it's collets. We had to drop support for them due to changes in the taper of the router. There's more info on our site under the Bosch Colt Case Study link. I would link it here but I try not to on forums.
John Torrez
Think & Tinker / PreciseBits

WillAdams
Posts: 8606
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: PreciseBits Collets

Post by WillAdams » Mon Sep 28, 2015 9:56 pm

Links from reputable companies who generously share their time and knowledge on the forums are always welcome.

This one?

http://www.precisebits.com/lab_reports/ ... lt_TIR.htm
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

TDA
Posts: 31
Joined: Wed Dec 18, 2013 11:14 pm

Re: PreciseBits Collets

Post by TDA » Mon Sep 28, 2015 10:04 pm

Thanks Will, I appreciate it.

Yeah, that's the one.
John Torrez
Think & Tinker / PreciseBits

WillAdams
Posts: 8606
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: PreciseBits Collets

Post by WillAdams » Mon Sep 28, 2015 10:13 pm

We do list European equivalents for the Dewalt DWP611 on the wiki, so if you can find the equiv. for your country, you should be able to get the Precise Bits collet set for that.

http://www.shapeoko.com/wiki/index.php/Spindle_Options
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Post Reply