3D printed step blocks

Discussion about Tooling and Fixtures. End Mills, Router Bits, Hold Downs, Fixtures, Etc.
Post Reply
UltiArjan
Posts: 48
Joined: Sun Dec 27, 2015 6:07 pm
Location: the Netherlands
Contact:

3D printed step blocks

Post by UltiArjan » Tue Aug 30, 2016 7:21 pm

FYI, just uploaded some 3d printable step blocks.
Main objectives; the bolt falls into the block so it can stay close to the piece it's holding, the thing is relatively low to stay out of the way of my dust suction.

https://www.youmagine.com/designs/low-p ... ps-for-cnc
1XS.jpg
1XS.jpg (91.41 KiB) Viewed 1761 times
2XS.jpg
2XS.jpg (84.42 KiB) Viewed 1761 times
-------------------------------------------------
Shapeoko3 #1331, Makita RT0700
Ultimaker2, Ultimaker2+E3Dv6 (abs only)

Shook
Posts: 139
Joined: Thu Nov 12, 2015 6:50 pm
Location: Downingtown, PA

Re: 3D printed step blocks

Post by Shook » Thu Sep 01, 2016 9:17 pm

Cool - added to collection.
Shapeoko 3 (#1107)

CastIrony
Posts: 650
Joined: Mon Jul 21, 2014 10:21 pm
Location: Portland, OR

Re: 3D printed step blocks

Post by CastIrony » Thu Sep 01, 2016 9:33 pm

I probably won't 3D print clamps, but that gives me a good idea for how I could cut some out of wood.
Shapeoko 3 #192 - Complete! Needs limit switches.

fredfow3
Posts: 18
Joined: Wed Jun 15, 2016 5:24 pm
Location: Massachusetts
Contact:

Re: 3D printed step blocks

Post by fredfow3 » Mon Oct 24, 2016 2:06 am

Nice blocks!

How do you like the Makita?

F
Shapeoko 3 XL - Dewalt 611 Router
PreciseBits Collet Set
V-Carve Pro 8.5, Meshcam Pro, Fusion 360, QCAD
UGS & Hot ChiliPeppr!

UltiArjan
Posts: 48
Joined: Sun Dec 27, 2015 6:07 pm
Location: the Netherlands
Contact:

Re: 3D printed step blocks

Post by UltiArjan » Fri Nov 04, 2016 7:34 pm

I like the Makita, use it mostly with the Elaire collect (could not find a 1/8" in Europe) but to be honest I can't compare as I never had anything else on the SO3....
-------------------------------------------------
Shapeoko3 #1331, Makita RT0700
Ultimaker2, Ultimaker2+E3Dv6 (abs only)

Post Reply