Discussion about the arduino based g-code interpreter, grbl
really helped!WillAdams wrote: ↑Wed Apr 16, 2014 10:51 amIn that case, the problem is some difficulty of feeds, speeds, machine rigidity (or lack thereof), deflection and cutting orientation.
What are your settings for:
- feed rate (in Grbl)
- cutting speed (how fast are you running your tool)
- plunge rate
- plunge depth
- are you cutting clockwise or counter-clockwise? Have you tried the other direction?
How tightly do you have your Z-axis adjusted? The Delrin V-wheels should not easily rotate when one tries to turn them, and they should all move when one turns the coupler or jogs the machine up and down.