PCBA for USB-C receptacle??

Post Reply
AuTIsNDoNG
Posts: 5
Joined: Wed Jul 15, 2020 9:35 am

PCBA for USB-C receptacle??

Post by AuTIsNDoNG » Tue Jul 28, 2020 10:03 am

Hi,
Last time I ordered some circuit boards in Shenzhen China, I decided to solder by myself, and there is a small USB-C, It has 4 main legs which should be soldered (I think), however the length is of such that they don't come close to clearing a 0.8mm PCB thickness. On the attached pictures you can see I've hand-soldered them and the solder has sunk. Can it work if the legs of USB-C were solder pasted with PCBA?
Wondering what the process is!
1.jpg
1.jpg (29.35 KiB) Viewed 170 times
2.jpg
2.jpg (52.78 KiB) Viewed 170 times
3.jpg
3.jpg (45.84 KiB) Viewed 170 times

Post Reply