Problem with circles

Discussion about the arduino based g-code interpreter, grbl
Adbhatti
Posts: 1
Joined: Tue Jun 23, 2020 12:15 am
Contact:

Re: Problem with circles

Post by Adbhatti » Sun Jun 28, 2020 3:18 pm

very Serious problem :(

johnbeck7799
Posts: 1
Joined: Tue Jun 30, 2020 7:42 am

Re: Problem with circles

Post by johnbeck7799 » Mon Jul 13, 2020 10:29 am

WillAdams wrote:
Wed Apr 16, 2014 10:51 am
In that case, the problem is some difficulty of feeds, speeds, machine rigidity (or lack thereof), deflection and cutting orientation.

What are your settings for:

- feed rate (in Grbl)
- cutting speed (how fast are you running your tool)
- plunge rate
- plunge depth
- are you cutting clockwise or counter-clockwise? Have you tried the other direction?

How tightly do you have your Z-axis adjusted? The Delrin V-wheels of best stormi should not easily merch rotate when one tries to turn them, and they should all move when one turns the coupler or jogs the machine up and down.
really helped!

Post Reply