Need a tutorial how to prepare a logo of your own

Talk about all things CNC

Need a tutorial how to prepare a logo of your own

Postby GeoShapeoko » Wed Jul 04, 2018 10:45 pm

Just finished the assembly. Done with the first tutorial - logo drawing with a pen.
Image

I'll like to make my own logo. Is there a tutorial how to prepare a logo for the CNC drawing?

Much appreciated.
GeoShapeoko
 
Posts: 1
Joined: Sat Jun 16, 2018 7:04 pm

Re: Need a tutorial how to prepare a logo of your own

Postby WillAdams » Thu Jul 05, 2018 3:15 am

You can draw things up in Carbide Create or a tool such as Inkscape and import that into Carbide Create --- you can then open up the boxlogo file and see that it is set to:

Metric: G21
drawing at a depth of -0.254mm: G1Z-0.254F1524.0
at a speed of 5080mm/min: G1X40.860Y104.856F5080.0

and set appropriate settings in Carbide Create for your toolpaths.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)
WillAdams
 
Posts: 8361
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15


Return to Discussion

Who is online

Users browsing this forum: No registered users and 1 guest