Live in the Columbus Ohio area

Talk about all things CNC
Jeff
Posts: 129
Joined: Thu Jun 29, 2017 12:33 pm

Re: Live in the Columbus Ohio area

Post by Jeff » Tue Jul 02, 2019 11:01 am

Can you tell me how the spindle rpm is controlled .
Jeff

tim614
Posts: 11
Joined: Mon Apr 01, 2019 5:46 pm

Re: Live in the Columbus Ohio area

Post by tim614 » Wed Jul 03, 2019 12:37 am

As you can see in the kit
It comes with a VFD controller and you have to program it to work with the spindle.
I’ve have read several posts regarding programming the VFD where people have said it was too complicated so I was worried but once I had a chance with it I found it really wasn’t that hard to get it programmed

neilferreri
Posts: 5
Joined: Fri Dec 11, 2015 3:58 am

Re: Live in the Columbus Ohio area

Post by neilferreri » Thu Aug 01, 2019 11:57 pm

Hey guys,
I'm in Dublin also. I've had a SO3 for a few years and upgraded to the XL a couple years ago.
I'm pretty active in the C3D forum, but, to be honest, I have barely looked at this one.
Neil

Post Reply