Zeroing issue

discussion of design changes / improvements / suggestions

Zeroing issue

Postby woodhobby11 » Fri Apr 05, 2019 5:28 pm

So I have this logo that I want to cut out and fill with epoxy. My idea is to design the logo and save all the toolpaths. I first cut out the background and fill it with epoxy. After a couple days I want to set it back up into the CNC and cut out the lettering in the epoxy. But I am having a problem trying to reload the exact xy values as the first time. I dont know if the CNC can even do this but if anyone has any idea how i can go about doing this or even tell me if its even possible that would be great.
woodhobby11
 
Posts: 6
Joined: Tue Jan 08, 2019 2:05 am

Re: Zeroing issue

Postby WillAdams » Fri Apr 05, 2019 5:43 pm

The machine should save the offsets and reuse them if you have homing switches.

If not, you could machine a pocket which just admits the endmill, set that to be zero, then start up the machine with the endmill in said pocket.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)
WillAdams
 
Posts: 8476
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15

Re: Zeroing issue

Postby woodhobby11 » Mon Apr 15, 2019 12:15 am

WillAdams wrote:The machine should save the offsets and reuse them if you have homing switches.

If not, you could machine a pocket which just admits the endmill, set that to be zero, then start up the machine with the endmill in said pocket.


The pocket for zeroing worked perfectly. Thank you so much for the idea.
Attachments
hghg.jpg
hghg.jpg (69.33 KiB) Viewed 82 times
woodhobby11
 
Posts: 6
Joined: Tue Jan 08, 2019 2:05 am


Return to Design Ideas

Who is online

Users browsing this forum: No registered users and 1 guest